PRODUCT RANGE

A bonding adhesive for one-sided adhering of Hertalan EPDM onto horizontal surfaces and slopes up to 20º. Onto surfaces such as wood, bitumen, concrete and suitably faced rigid thermal insulation boards.

/ Coverage approx. 20 m²

/ Available in 6 kg cans.

Safety data sheet

A ready-for-use contact adhesive which has been developed especially for adhering Hertalan EPDM membranes both vertically and horizontally onto surfaces such as wood, bitumen, masonry material, lead and suitable faced rigid thermal insulation boards, etc..

/ Coverage approx. 15 m²

/ Available in cans of 0.9 and 5.3 kg.
 

Safety data sheet

A spray applied contact adhesive which has been developed especially for the adhering of Hertalan EPDM membranes on vertical or horizontal surfaces such as wood, bitumen, masonry material and suitable faced rigid thermal insulation boards, etc..

/ Coverage approx 80 m².

/ Available in 20 litre cans.

Safety data sheet

A spray applied contact adhesive which has been developed specially for the adhering of Hertalan EPDM membranes on vertical or horizontal surfaces such as wood, bitumen, masonry material and suitable faced rigid thermal insulation boards, etc.. A ready for use contact adhesive system.

With the matching gun and hose the adhesive can be directly sprayed, without the need for a compressor or power supply.  

/ Net use is approx. 200 gr/m² (excl. propellant) applied on both sides.

/ Available in pressurised canisters of 14.2 kg (18 litres).

Safety data sheet

A high quality MS Polymer adhesive sealant, specially developed for adhering Hertalan EPDM sheets and accessories both vertically and horizontally to timber, bitumen, concrete, EPDM and metalwork etc. and membrane jointing.

/ Coverage approx 7 linear metres for a cartridge (pea sized bead).

/ Available in 600 ml foils and 290 ml cartridges.
 

Safety data sheet

A primer based on polyurethane resin and solvents. The primer is applied on porous substrates to improve adhesion of hertalan ks96. hertalan ks96 primer forms on porous substrates an adhesion layer for the application of hertalan ks96. 

/ The usage will amount to approximately 100-250 g/m², depending on the substrate.

/ Available in 1 litre cans.
 

Safety data sheet

HERTALAN FS14 is a high-quality, durably elastic black single-component adhesive glue based on synthetic rubber. This sealant can be used on both horizontal and vertical surfaces in HERTALAN® façade systems.

/ Coverage approx. 7 linear metres for a cartridge (pea sized bead).

Safety data sheet